Vax S84-P1-B, Давайте начнем

Страница: 4 / 13

Push the main body down into the
floorhead until it clicks into place.
Stand the stick steamer upright
by pushing the main body
forward to lock into position.
Assembling the steamer
Getting to know your machine Getting started
Name Steam Switch
Voltage Please refer to product rating label
Wattage Please refer to product rating label
Water tank capacity
0.36L
Cord length 7m
Weight 3.5kg
Technical Specification
Subject to technical change without notice.
Clean & Scrub Kit (Type 1)
1-1-137101
Multi-Surface Kit (Type 1)
1-1-137103
360° Window Pads
1-1-137252
360° Scrub Pads
1-1-137251
360° Flexi-Tool Socks
1-1-137250
Hard Water Filter (Type 7)
1-1-136462
Accessories & Consumables*
* To purchase consumables and accessories, please visit vax.co.uk
Trigger
Tank
Floorhead release button
Handheld handle
Handheld trigger
Tank release buttons
Handle
Before you Begin
CAUTION:
The steamer and accessories get very hot during use, always allow them to cool down before handling.
Always unplug the steamer when assembling. Always unplug the steamer before emptying the tank or changing the
cloths/accessories.
IMPORTANT: Please refer to floor/surface manufacturer’s care recommendations before use and test the steamer
on a hidden area to begin with. Test for colour fastness in a small hidden area of upholstery/fabric to check for colour
removal before use. When using the steamer, basic safety precautions should always be observed.
Don’t aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam jet or floorhead
from a short distance (there is a risk of scalding). The steamer is equipped with a thermostat and a thermal cut-out.
If for any reason the steamer overheats it will switch off. If this happens unplug the steamer, allow to cool for a least
2 to 4 hours and re-try.
Steam ready indicator
Main body
Push the handle into main body
until it clicks into place.
Handheld release button
Floorhead
Quick release cord hooks