IMPORTANT:
If the brushbar does not rotate easily then the belt may not have been fitted correctly. Make sure
the belt is not twisted.
Replacing the belt
Removing a blockage from the hose
Twist upper hose
connector anti-clockwise
and remove upper hose.
Twist lower hose
connector anti-clockwise
to unlock. Pull and remove
lower hose.
Remove any blockage
by inserting wire coat
hanger into hose.
TIP
To test for a blockage in
hose, drop a small ball of
paper through the hose.
The paper will drop through
if the hose is clear.
Lift to remove brushbar
cover from base of
vacuum cleaner.
Lie vacuum cleaner on its
back exposing brushbar.
Use a crosshead
screwdriver to remove
6 screws.
Lift to remove brushbar.
Remove and dispose of
old belt. Clean any debris
from spindle and place
new belt onto spindle.
Place belt on rounded
area of brushbar without
bristles. Line up right side
of brushbar with base,
push into place. Lift and
push left side of brushbar
until clicks into place.
Let’s talk technical