
Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900
4
Operation
IMPORTANT:
Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
Tool required:
Phillips head screwdriver
1. Place the base of the cleaner so it is facing away from you.
Position the body so that the lower hose is on your right
hand side. Push the body down into place.
2 To secure the body in place insert two screws supplied into
the back of the cleaner, through the hole located above
the hose guide.
3. With the cord clip on the handle facing you place it onto
the top of the body of the cleaner.
4. Push down firmly and line up the hole on the rear of the
handle. Insert lock piece into hole and screw into place
with the long screw.
5. Using the handle attach the main hose into the left hand
side of the cleaner. Press down firmly to secure in place.
The main hose can then be secured in the top and side of
the hose holder.
6. Push the dirt container lid firmly on top of the dirt container
and place it onto the cleaner. The canister lid will snap into
place in the body of the cleaner.
7. Attach the tools to the tool holder. The dusting brush fits
over a post at the back of the vacuum cleaner.
The crevice tool fits into the extension wand. The extension
wand is located on the right hand side.
Содержание MACH1 VMUB1900
Страница 9: ...www vax com au 9 Notes ...
Страница 10: ...Vax Service line AU 1300 361 505 NZ 0800 800 900 10 Notes ...
Страница 11: ...www vax com au 11 Notes ...