![background image](http://html.mh-extra.com/html/vax/mach-7-vzl-6017-series/mach-7-vzl-6017-series_manual_856807011.webp)
Insert brushbar through belt an position belt in groove (A)
on brushbar (Fig.6/18).
Brushbar
IMPORTANT: Disconnect cleaner from electrical
socket.
WARNING: Brushbar can start suddenly. Unplug
cleaner before turning it over.
Replacing brushbar
When agitator brushes are worn, the brushbar should be
replaced.
Inspecting brushbar
To check condition of brushes, move edge of a card
across bottom plate while turning brushbar.
To maintain cleaning effectiveness, replace brushbar if
brushes do not touch card (Fig.6/19).
11
maintenance
Tighten screws securely (Fig.6/16).
Inspecting the belt
The belt is designed to last for a long time and is not
normally replaced. However, if the belt is cracked, gouged or
broken, it should be replaced.
Slide flat belt off large pulley as shown in Fig.6/14.
To remove belt, slide back of belt over pulley (A). Then firmly
pull on belt and ‘snap’ it out. Discard used belt.
To install new belt (with lettering on outside of belt), slide
back of belt over pulley and pull front of belt toward groove
(B) next to pulley. Belt will ‘pop’ into place (Fig.6/17).
Fig.6/16
Fig.6/18
Fig.6/17
A
A
A
B
B
Fig.6/15
!
!
Fig.6/19
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
VZL-6017 User Guide v3.2_Vax VZL-6017 09/01/2012 17:25 Page 11