manualshive.com logo in svg
background image

• Always keep the area you’re cleaning well lit.

• Always replace the fuse in the plug with a British 13amp fuse.

• Always unplug the machine before carrying out any maintenance and before 

connecting or disconnecting the accessories.

• Take extra care when cleaning on the stairs.

• Turn off all controls on the machine before disconnecting or connecting the 

power cord. After use always wrap the power cord around the cord clips 

provided.

• Always protect the power cord from heated surfaces and open flames.

• Use only CE/UKCA approved 13amp extension cords, non-approved extension 

cords may overheat. Care should be taken to arrange the extension cord as it 

can be a trip hazard.

• Keep all openings clear and free from debris as this may affect the airflow/

suction/water pick up.

• Always use the machine in an upright position. To prevent motor damage from 

dirty water, never hold the machine upside down or on its side.

• Keep the machine away from direct sunlight and store in a cool, dry area.  

Before storing the machine please ensure all water/solutions tanks are empty  

and filters are thoroughly clean and dry.

Basic Safety Precautions

• This machine is intended for indoor cleaning and vehicle interiors during dry 

weather conditions.

• Keep fingers, hair and loose clothing away from moving parts and openings 

whilst using the machine.

• Before using the machine test your carpets/rugs/upholstery for colourfastness 

and pile distortion.

• This machine is not intended to be used or cleaned by persons with reduced 

physical, sensory or mental capabilities, or lack of experience or knowledge, unless 

they have been given instructions concerning the safe use of the appliance by a 

person legally responsible for their safety. They should be supervised whilst using 

the appliance. Children shall not use, clean or play with this appliance, which when 

not in use should be secured out of their reach.

• Only VAX recommended tools and solution should be used with this machine. 

Using other solutions may invalidate the guarantee.

Содержание Home SpotWash Series















Отзывы: