Taking care of your machine
Let’s talk technical
Cleaning the shroud
Turn the dirt container
lid anti-clockwise and lift
to remove
24hr
MAX
40˚C
Remove the pre-motor
filter to allow access to
the shroud
Tap the shroud over a bin to
remove dirt and debris
Wash the shroud under
running water and leave to
fully dry before placing back
into the machine
Removing debris from the brushbar
Switch off your vacuum
cleaner at the main socket.
Using a pair of scissors cut
any hair or debris free from
around the brushbar
Removing blockages from the TurboTool
Push both buttons to
open the turbo tool
If the air inlet, hose or telescopic
tube is blocked, switch off the
vacuum cleaner and remove the
blockage(s) before re-starting the
vacuum cleaner
WARNING
Using a pair of scissors,
cut any hair or debris free
from around the brushes
Cleaning the post-motor filter
Twist post motor filter
cover anti-clockwise and lift
to remove
Remove the filter
Always switch the machine off
and unplug before carrying out
any maintenance
WARNING
Remove the rubber ring
Wash the filter under
running water (40°C max)
24hr
MAX
40˚C
Wash the filter under
running water (40°C max)
Leave to dry for 24 hours
and then replace before
using your vacuum
