Vax Compact Power CDCW-CPXP, Руководство пользователя

Страница: 11 / 16

11
Remove the tanks and lie
the machine on its back
exposing the brushbar.
Pull to remove the
brushbar end cover on
the left and the belt cover
on the right.
Removing and cleaning the brushbar
Removing and cleaning the nozzle
Remove both tanks and
tilt the machine back.
Lift the nozzle from the
top and pull forward
to remove.
Rinse the nozzle under
water to remove
dirt/debris.
To replace the nozzle, line up the tabs on the nozzle
with the tabs underneath the front of the machine.
Push the nozzle back and down until it clicks into place.
IMPORTANT:
Carpets should be dry vacuumed thoroughly before washing. This will help prevent excessive build up of
dirt/debris in the nozzle.
If the nozzle is fitted incorrectly, this will cause poor dirty water pick up.
MAINTENANCE AND CLEANING
Lift the brushbar out from
the left hand side first
and unloop the brushbar
from the belt. Pull the
brushbar to remove from
the machine.
Using a pair of scissors,
remove any threads or
hair caught around the
brushes. Rinse under
warm water (max 40�C)
to remove dirt/debris.
Using a crosshead
screwdriver remove the
6 screws.
Using a crosshead
screwdriver remove the
screw at the bottom of the
rug guard and lift upwards.