Storing your vacuum cleaner
Press cord rewind button
to retract cord into
vacuum cleaner.
Place floor head into
parking slot on the back
of vacuum cleaner for
storage and carrying.
Taking care of your machine
Let’s talk technical
TIP
To test for a blockage in hose, drop
a small ball of paper into the hose.
The paper will drop through if the
hose is clear.
Removing blockages from the TurboTool*
*Not applicable for all models.
Tabs
Slide the locking ring
to remove.
Lift and separate
the housing.
Using a pair of scissors,
remove any threads
or hair caught around
the brushbar.
Line up the tabs on front of
housing and push together
to refit. Slide locking ring
into groove to secure.
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
Remove the hose from the vacuum
cleaner and telescopic extension tube.
Remove any blockage by inserting wire
coat hanger in to hose.
Removing a blockage from the hose
Cleaning the post-motor filter
Squeeze the filter cover clips
together and pull to remove.
Push tab pull to remove the
post-motor filter.
Tap the post-motor filter over a bin
to release dirt/debris. Always replace
before using your vacuum.
Warning: Do not wash the post-motor filter.
IMPORTANT: Remove accessory from hose or telescopic extension tube before performing maintenance or trouble
shooting checks.
