MAX
40˚C
!
MAX
40˚C
Cleaning the pre-motor filter
Emptying and cleaning the dirt container
Taking care of your machine
Taking care of your machine
Press dirt container release
button and lift to remove.
Press dirt container release
button and lift to remove.
Twist the shroud and pull
to remove.
Remove the pre-motor filter.
Separate the frame and foam.
Tap the filter frame and foam over
a bin to remove any dirt/debris.
Rinse both the frame and foam
under water (Max 40°C).
Hold dirt container over a bin
and pull the dirt release clip on
the bottom of the dirt container,
allowing dirt/debris to fall out.
Leave to dry for 24 hours or until
fully dry before placing back in
the machine.
Tap the shroud over a bin to
remove any dirt/debris.
Rinse the shroud under water
(Max 40°C) Leave to dry for 24
hours or until fully dry before
placing back in the machine.
IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
TIP
TIP
Don’t over fill the dirt container
to avoid blocking the air flow
through the vacuum cleaner.
Clean the pre-motor filter every time the
dirt container is emptied and replace the
post-motor filter every 12 months.
MAX
40˚C
!
MAX
40˚C
24hr
