Assembling your vacuum cleaner
Press both buttons at end
of hose and insert into
hose entry point.
Insert hose grip into
telescopic extension tube.
Press button on telescopic
extension tube and adjust
to required length.
Insert the other end of the
telescopic tube into the
floor head.
Before you begin cleaning
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner
off and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum
cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully dry
before putting back into the machine).
Clean the pre-motor filter every time the dirt container is emptied and replace the post-motor filter every 12 months.
If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
Getting to know your machine
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Always switch off the vacuum
cleaner before connecting
or disconnecting the hose/
attachments, or removing and
emptying the dirt container.
IMPORTANT
Name
Action 402
Voltage
220-240V~50Hz
Wattage
700watts
Cord length
5/5/5.3m
Weight
4.3kg
Technical Specification
Subject to technical change without notice.
Pre Motor Filter (Type 118)
1-1-134534-00
Post Motor Filter (Type 106)
1-1-134390-00
TurboTool (Type 4)
1-1-134340-00
Tool Connector (Type 1)
1-1-133838-00
Crevice Tool (Type 10)
1-9-128020-0
Combination Floor Tool (Type 6)
1-1-134330-00
Dusting Brush (Type 5)
1-9-127512-00
Accessories & Consumables
*
To purchase consumables and accessories, please visit
vax.co.uk
On/off button
Floor head
parking slot
Cord rewind button
Dirt container
release button
Carry handle
Dirt container
Separator and shroud
Post-motor
filter cover
Hose entry point
Pre-motor
filter (hidden)
C86-AD/ID_Action_402_EcoSeries_UG_[J2543]_Amnd_02.07.14.indd 6-7
02/07/2014 12:40
