Storing your vacuum cleaner
Press cord rewind button
to retract cord into
vacuum cleaner.
Place floor head into
parking slot on the back
of vacuum cleaner for
storage and carrying.
Taking care of your machine
Taking care of your machine
Squeeze the filter cover clips
together and pull to remove.
Push tab pull to remove the
post-motor filter.
Check the post-motor filter
for discolouration.
MAX
40˚C
!
MAX
40˚C
Cleaning the pre-motor filter
Press dirt container release
button and lift to remove.
Remove the pre-motor filter.
Separate the frame and foam.
Tap the filter frame and foam over
a bin to remove any dirt/debris.
Rinse both the frame and foam
under water (Max 40°C).
Leave to dry for 24 hours or until
fully dry before placing back in
the machine.
TIP
Clean the pre-motor filter every time the
dirt container is emptied and replace the
post-motor filter every 12 months.
24hr
IMPORTANT:
The exhaust filter is designed to offer long life with no maintenance. The filter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the filter as
this will damage the delicate filter media.
Post-motor filter maintenance
!
40˚C
MAX
24hr
C86-AD/ID_Action_402_EcoSeries_UG_[J2543]_Amnd_02.07.14.indd 10-11
02/07/2014 12:40