Vax AWU01, Давайте начнем

Страница: 8 / 11

Let’s talk technical
Replacing the belt
Place belt on rounded
area of brushbar
without bristles. Line up right side of
brushbar with base, push
into place. Lift and push
left side of brushbar until
clicks into place.
Lie vacuum cleaner
on its back exposing
brushbars. Use a cross
head screwdriver.
Undo 5 screws.
Line up brushbar
cover, push until it
clicks into place.
Replace 5 screws
and tighten.
Lift to remove
brushbar cover. Lift to remove
brushbar. Remove and
dispose of old belt. Clean any debris from
spindle. Place new
belt on spindle.
Remove hose end from the
hose to machine connector. Lift clip under the
hose inlet. Pull latch out and
remove hose.
Line up latch on accessory hose and
push until clicks into place Push the other
end of the hose into machine connector.
Removing a blockage from the hose
Accessories
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
Pro Cleaning Kit (Type 2)
1-1-133326-00
All our best tools all in one kit that makes cleaning
your home quicker, easier and with even better results.
We’ve taken care of cleaning all of the hard to reach
areas such as on top of cupboards and in between
blinds to the dust that collates behind and
within the radiator.
If the brushbar does not
rotate easily then the belt
may not have been itted
correctly. Make sure the
belt is not twisted.
CAUTION
Insert a broom handle or
similar blunt instrument into
the hose to remove blockage.
TIP
Test for blockages by dropping a small ball
of paper through the hose. Remove any
blockage by inserting wire.
TurboTool (Type 6)
1-1-134419-00
Use the TurboTool for vacuuming your stairs,
upholstery and car interiors. It’s great for picking up
stubborn pet hair.