Vax AWU01, Давайте начнем

Страница: 4 / 11

Getting to know your machine Getting started
Assembling your vacuum cleaner
Lift handle up and click into place.
Put dusting brush into dusting
brush holder with brushes
facing outwards.
Line up latch on accessory hose,
push until clicks into place.
Line up TurboTool brushes into
TurboTool holder, push into place
until it clicks (some models only).
Push accessory hose into hose
to machine connector.
Push extension tube and crevice tool
onto holder.
Before you begin cleaning
CAUTION: Always switch of the vacuum cleaner before connecting or disconnecting the hose/attachments
or removing and emptying the dirt container.
Filters require cleaning at least every 3-6 months. If the vacuum cleaner is blocked, switch of and unplug before
removing the blockage.
When the vacuum cleaner is stood in the upright position, or when using the hose and tools the brushbar height adjuster
must be set to the highest setting.
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner of. If this happens switch the vacuum cleaner of
and unplug from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages.
Allow the vacuum cleaner to cool for approximately 1 hour (if you have cleaned the ilters please wait 24 hours for the
ilters to fully dry before putting back into the machine).
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Extension tube
and crevice tool
Handle release button
Dust brush holder
Handle
Carry handle
Dirt container
release button
Separator
Dirt container lid
Dirt container
Pre-motor ilter
(hidden)
Filter release clip
Upper release
cord hook
Name Power Nano
Voltage 220-240V
Wattage 850W
Weight 5.25kg
Technical Speciication
Subject to technical change without notice.
Filter Kit (Type 110)
1-1-134394-00
Belt Kit (Type 25)
1-1-134411 -00
TurboTool (Type 6*)
1-1-134419-00
Crevice Tool (Type 16)
1-1-134427-00
Dusting Brush (Type 10)
1-1-134426-00
Accessories & Consumables
* Selected models only.
To purchase consumables and accessories, please visit vax.co.uk
Hose connector
Hose inlet
On/Of button
Floorhead
Hose
Height adjuster dial