www.vax.com.au
12
Maintenance
(Keep your Vax as good as new)
Belt or brush removal and replacement continued...
(Phillips screwdriver required)
When replacing the belt, first slide it onto the
motor shaft. Then slip the brush roll through the
belt. Place the belt in the area of the brush
without bristles. Slide the brush roll into the
nozzle, ensuring that the brush roll end caps are
orientated correctly, see inset picture. Manually
turn the brush roll to check that it is fitted
properly.
Replace the belt cover by inserting the end
furthest from the brush first. Then replace the
front of the belt cover before securing in place
with the two screws.