15
Every three years the area behind the fan needs to be cleaned in order to keep the Fresh-r
in optimum performance.
To clean the area behind the fan, do the following:
o
Open the door.
o
Put the main switch in OFF position.
o
Remove internal door (Everywhere version) and filter if fitted
o
Un-clip the two electrical connections of the fan – they are dedicated connectors and
cannot be reconnected wrongly
o
Gently remove the rubber mounted temperature sensor being careful not to damage the
little wire protruding from the end – let it hang down in front of the heat exchanger
o
The two operations above may require several cable ties to be cut away – replace with
new afterwards
o
Unscrew the 4 screws of the fan using a Torx T20.
o
Make sure the rubber grommets don’t drop away and become lost.
o
Move the fan assembly gently out the unibody.
W
ing n
ut
s
ho
ld
ing
f
ilt
er
br
ac
e
C
ount
er
s
unk
M8
nut
s
ho
ldi
ng
top c
lamp.
P
us
h t
ow
ar
ds
f
rame
(r
ed ar
row
s
) w
he
n r
e
-t
ight
e
ni
n
g
Figure 9 Top clamp
Figure 10 Lower clamp
f
Figure 11 Fan assembly as installed
Figure 14 Fan assembly wires unclipped
