background image

KNOWING YOUR 

SCREEN

1

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INFORMATION AND 

INSTRUCTIONS. KEEP FOR FUTURE REFERENCE.

       

CAUTION

For optimal projection, safe installation and long-lasting use of the screen, 

follow below instructions carefully:

• Always handle the screen on a clean, level surface covered with clean 

  cloth, film, etc. 

• Gently hold and put down the unit to avoid any damage to the screen surface.

• Do not touch the screen surface by hand. Use gloves to avoid fingerprints, 

  hand sweat, or dust on the screen surface.

• Do not poke the screen surface with any sharp or hard objects to avoid 

  scratches or tears.

• It is recommended to clean the screen once every two weeks.

• When cleaning, wipe the screen with a soft cloth and lukewarm water. For 

  general dust, use a soft brush to clean the screen surface (rough towels or 

  cloth may damage the screen).

• Do not clean with abrasive detergent, solvent or other coarse chemicals to 

  avoid permanent damage to the screen surface.

• You may notice a slight smell during first-time use, which will dissipate over time.

  If the smell is too strong, open a window to ventilate the room.

• Children should be supervised to ensure that they do not play with the screen. 

• Please contact your local dealer for repair or maintenance. For any questions 

  or concerns, please email us at [email protected] or call us at (877) 969-8282.

READ AND SAVE THESE INSTRUCTIONS

Содержание VA-LT030














Отзывы: