How to Use
Heating Mode
Note:
Cleaning and Maintenance
1. Use whole milk (fat content > 3.0%) for the best results.
2. The frother can heat milk up to 65
℃
- 70
℃
/ 149
℉
- 158
℉
.
Frothing Mode
Note:
Milk will warm up once frothed.
Specif ications
1. Install the frothing whisk onto
the whisk. Add an appropriate
amount of milk into the pitcher
no higher than the MAX frothing
level, cap on the lid. Connect to
a power source. The product is
now in standby mode.
2. Press the Power Button to
start heating and frothing
milk, the indicator will turn
red when working and flash
when the process is
completed.
3. Press and hold the Power
Button for 2 seconds to
activate milk frothing mode,
the indicator will turn blue
when frothing and flash when
frothing is finished.
1. Remove the frothing whisk, add an appropriate
amount of milk into the pitcher no higher than
the MAX heating level. Bring the device into
standby mode the same way as in frothing mode.
Note:
There will be a small amount of frothing once the milk is heated.
Always disconnect the appliance from power after use and before cleaning.
1. Never immerse the power base and cord in water or expose them to moisture.
2. Clean the pitcher in a dishwasher or wipe it with a damp cloth, do not use abrasive cleaner.
3. To clean the lid, remove it from the pitcher and clean in a dishwasher or under tap water.
4. Rinse the whisk with clean water and wipe it dry, store it in a safe place.
2. Press the Power Button to start heating and
whisking milk. The indicator will turn red when
working and flash when the process is completed
Model
Input
Power
Capacity
Cable Length
Working Time
VA-EE009
US / CA: AC 120V 60Hz
EU / UK: AC 220V - 240V 50Hz
550W
300 ml / 10.1 oz Max
≥
0.7m / 27.6 in
5.5 minutes max
Whisk
Function
Frothing cold milk
150 ml / 5.1 oz
2 minutes
4.5 minutes max
5.5 minutes max
150 ml / 5.1 oz
300 ml / 10.1 oz
Frothing & Heating
Heating
(with a small amount of froth)
Capacity
Working Time
Whisk (Frothing)
Whisk (Heating)
MAX
MAX
MIN
MAX
MAX
MIN
02/03
