Instruments and controls
75
Inductive charging
9
Warning
Inductive charging can affect the
operation of implanted
pacemakers or other medical
devices. If applicable, seek
medical advice before using the
inductive charging device.
9
Warning
Remove any metal objects from
the charging device before
charging a mobile device, as these
objects could become very hot.
To charge a mobile device:
1. Remove all objects from the
charging device.
2. Place the mobile device with the
display facing upwards on the
charging device.
3. LED illuminates green, when
mobile device is charging.
The mobile device must be smaller
than 7 cm by 15 cm to fit into the
charging device.
PMA or Qi compatible mobile devices
can be charged inductively.
On some mobile devices, a back
cover with an integrated coil or a
jacket may be required to use
inductive charging.
Protective cover for the mobile device
could have impact on the inductive
charging.
LED illuminates yellow, when
● metall objects have been
detected in the charging area
● mobile device was not placed
properly.
In the case that the mobile device is
not charging properly:
1. Remove the mobile device from
the charging device.
2. Rotate the mobile device by 180°.
3. Wait 3 seconds after the LED has
extinguished and place the mobile
device on the charging device
again.
Содержание Crossland X 2020
