Vauxhall Crossland X 2020, Руководство пользователя

Страница: 104 / 245

102 Lighting
Automatic light control
When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
lights and headlights automatically
depending on the external lighting
conditions and information given by
the wiper system.
Make sure the sensor is not blocked
3
10,
3
35.
Daytime running light
3
104.
Automatic headlight activation
During poor lighting conditions
headlights are switched on.
Additionally, headlights are switched
on if the windscreen wipers have
been activated for several wipes.
LED headlights
3
104.
Tunnel detection
When a tunnel is entered headlights
are switched on immediately.
High beam
Push to switch from low to high beam.
Pull to deactivate high beam.
High beam assist
3
102.
High beam assist
The camera in the windscreen
detects the lights of oncoming or
preceding vehicles. Once activated,
high beam assist remains active and
switches high beam on and off
depending on surrounding
conditions. The latest setting of the
high beam assist will remain after the
ignition is switched on again.
This feature automatically activates
the high beam in the dark when
vehicle speed is faster than 15 mph.
It switches automatically back to low
beam when:
● The camera in the windscreen
detects the lights of oncoming or
preceding vehicles.
● The vehicle speed drops below
9 mph.
● It is foggy or snowy.
● Front or rear fog lights are
switched on.
● Driving in urban areas.
If there are no restrictions detected,
the system switches back to high
beam.