Vauxhall CORSA, Руководство пользователя

Страница: 286 / 321

284 Vehicle care
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.
4. Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Ensure that the edge of the body
fits into the notch of the jack.
With the jack correctly aligned,
jack up until wheel is clear of the
ground.
5. Unscrew the wheel nuts.
6. Change the wheel.
7. Screw on the wheel nuts.
8. Lower the vehicle and remove
jack.
9. Install the wheel wrench ensuring
that it is located securely and
tighten each bolt in a crosswise
sequence.
Tightening torque for 15" is
100 Nm and for 16" is 115 Nm.
If the vehicle is equipped with
alloy wheel rims, note that the
wheel bolts can also be used for
the spare wheel with steel rims. In
this case, the spare wheel is
secured by the conical contact of
each bolt.
10. Vehicles with wheel cover: Align
the valve hole in the wheel cover
with the tyre valve before
installing.
Install wheel nut caps.