Vauxhall 2009 Tigra, Руководство пользователя

Страница: 146 / 198

142 Self-help, vehicle care
4. Before positioning the jack 3 , set it to the
necessary heig ht b y rotating the eye by
hand. Position the jack arm at the front
or rear so that the jack claw (arrow in
Fig.) spans the v ertical base and grips in
the recess in the vertical base. M ake sure
it is p roperly positioned.
The edg e of the jack base must be on the
ground directly below the jac king point in
a m anner that p revents it from slipping.
Raise vehicle by turning crank handle.
If this is not the case, carefully lower the
vehicle imm ediately and reposition the
jack.
5. Unscrew w heel bolts and wipe clean with
a cloth. Then ap ply a lig ht coa ting of
grease to the wheel bolts. Do not grease
the thread of the bolts. Do not put the
wheel bolts d ow n in a location where
they m ay b ecome soiled.
If the wheel b olts have retaining
washers
3 , they must not be removed.
6. Change the wheel. N otes on sp are
wheel – see page 138, notes on
temporary sp are wheel – see page 139.