119
Driving and Operation
Control indicator
v
comes on for a few seconds after the
ignition is turned on. The system is ready for
operation when the w arning light goes out.
Flashing during driving:
This shows the system has come into a ction.
The eng ine output may be reduced (the
sound of the eng ine chang es) and the
vehicle may be b rak ed automatically to
a small degree.
Illum inates while driving:
Fault in the system. Driving ca n be
continued. Poor road surface conditions
may however still cause vehicle stability to
be im paired.
Have the ca use of the fault eliminated by
a workshop. The self-diagnosis integrated
into the system allows rapid fault
identification.
Control indica tor m ay illuminate when
the tem porary spare wheel is in use.
The system is then d eactiva ted.
Illuminates after interruption of power
supply
e.g. after disconnecting battery.
After a power supply interrup tion the
steering angle sensor must be calibrated
to ma ke the system operationa l:
z
Automatic calibration d riv ing in straight
line at constant slow 12 to 25 mph
(20 to 40 km/h) speed on level, dry road .
z
Manual calibration by turning steering
wheel from limit position to limit position.
If the indicator light does not go off after
successful calibration, observ e notes in
midd le column.
Содержание 2009 Tigra
Страница 1: ...TIGRA Operation Safety and Maintenance Owner s Manual ...
Страница 2: ...VAUXHALL Tigra Operation Safety Maintenance ...
Страница 10: ...6 In Brief ...
Страница 192: ...188 Service Maintenance ...