Lighting and Appliance (X-10®) Control
Controlling your lights and appliances can be performed by using either the 1-digit or 2-digit operation.
With the 2-digit X-10 operation, you
can control up to 100 lights and appliances explicitly. The 1-digit
operation is used to reduce the number of keystrokes for the lights/appliances control for up to 9 X-10
modules that are used most frequently and have the same House Code. 1-digit operation also allows ALL
ON/OFF for the House Code Lighting Group.
Note: When the Controller receives an X-10 command, the Aris
LIGHTS
light will flash.
Lighting Control — 2-Digit Operation
A) Move the slide switch on the RC-8 remote control to the Lts/App mode position
B) Press a digit (0 through 9), corresponding to the desired House Code.
Vaux Digit button
X-10 House Code
1
A
2
B
3
C
4
D
5
E
6
F
7
G
8
H
9
I
0
J
C) Press a digit (0 through 9), corresponding to the desired Unit Code.
Vaux Digit button
X-10 Unit Code
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
10
D) Press the ON or OFF button to control the X-10 Module.
E) To Dim/Brighten the Module (Lamps only),
press
Chan down or up
button, and hold until the lamp is adjusted to
the desired level. Equivalently, you may press
Vol down or up
buttons.
Example of 2-digit X-10 Operation:
either a lamp module or an appliance module set to a house code of “D”
and a unit number of “5”, would be addressed by pressing the two-digit code, 4 5. An X-10 module set to a
house code of “F” and a unit number of “9,” would be addressed by pressing the two-digit code, 6 9.
38
