7
5.
ELECTRICAL CONNECTIONS
Note: the mains plug should only be inserted when all other connections have been connected.
The system may only be connected with the mains voltage stated in section 9.
5.1
Establishing the electrical connections
1. Connect the
motor cable
to the telescopic drive and insert the second end of the motor cable into the connection (1) of the
control box (illustration 1).
2. Insert the
operating element
into the connection (b) or (c) the control box (illustration 1).
3. Insert the IEC
power connector
on the mains cable into connection (A) of the control box (illustration 1).
Slide the cable under the strain relief hook – refer to illustration 2. The mains cable does not apply if a TV switch-off is avai-
lable.
4. Depending upon the version -> connect the
wireless receiver cable
with the
wireless receiver
and insert the second end
of the cable into the connection (b) or (c) the control box (illustration 1).
5. Depending upon version -> connect the cable (IN) for
TV switch-off
(illustration 3) with the connection (2) of the control box
(illustration 1).
6. Depending upon version -> connect the cable (CB) (IEC power connector) for the
TV switch-off
(illustration 3) with connec-
tion (A) of the control box (illustration 1). Clamp the cable under the strain relief hook – refer to illustration 2.
7. Depending upon version -> connect the cable (TV) (IEC power connector) for the
TV switch-off
(illustration 3) with the flat
screen – only carry out this step after assembly of the flat screen.
8. Depending upon version -> an additional unit can be connected to the cable (AUX) (Schuko socket) of the TV switch-off.
9. Mains socket of the
mains cable
or depending upon version -> connect the mains plug (B) of the
TV switch-off
(illustration
3) to the mains.
Operating element
Wireless receiver
1 motor cable
2 TV switch-off
(IN)
Mains cable
(version without TV
switch-off) or
TV switch-off
(CB)
Strain relief
for the mains cable
or TV switch-off (CB)
Control box connections
Illustration1
Illustration2
A
2
c
b
1
