OPERATING MANUAL 3300 HSDR V4.4/20-EN
Page | 5
(type 3900 or 3901) onto the quick coupling and let it engage. Connect the gun
to the compressed air supply via the quick coupling of the air connection. By
operating the trigger you put the pressure cup gun into operation.
Attention:
Wear heat-resistant gloves when using
heated medium. Danger of burns!
The spray pattern can be influenced by the following factors:
•
Material quantity via stop screw/nozzle needle
•
Adjusting the intake pressure (optional)
•
Distance between hand spray nozzle and object
•
Angular position of the manual spray nozzle to the object
End of work: Vent the pressure container by turning the pressure container
counterclockwise. Disconnect the device from the compressed air supply after
each use. Clean the device and the hoses according to the instructions.
Attention:
Never operate the trigger while the container is under pres-
sure but the pressure cup gun is not connected to the com-
pressed air source. This can push the medium into the air ducts
and render the pressure cup gun unusable!
7.
Maintenance and care
Clean the compressed air device after each use. Fill the pressure tank with
cleaning medium and flush the pressure cup gun and the hoses (if present) by
starting the device.
We recommend benzine or commercially available turpentine-based cleaners.
Do not use aggressive cleaning media! Following the maintenance instructions
will ensure a long service life and trouble-free operation for this quality product.
Attention:
Pay attention to a proper disposal of the residues, which arise
during the maintenance and care.
8.
Storage
The compressed air tool must be stored under the following conditions:
•
If residual material is present, store only upright.
•
Carefully clean the pressure cup gun after each use.
•
Store in a dry and dust-free place.
•
Do not expose to liquids and/or aggressive chemicals.
•
Keep out of the reach of children.