OPERATING MANUAL 2000 KMS V4.4/20-EN
Page | 5
Attention:
Pay attention to a proper disposal of the residues, which arise
during the maintenance and care.
8.
Storage
The compressed air tool must be stored under the following conditions:
•
Remove residual material from the container.
•
Carefully clean the spray gun after each use.
•
Store in a dry and dust-free place.
•
Do not expose to liquids and/or aggressive chemicals.
•
Keep out of the reach of children.
9.
Troubleshooting
In all cases of malfunction, please first check whether there is sufficient com-
pressed air available, whether the spray material can still be processed, wheth-
er the expiry date has passed or whether the material has dried out.
•
Gun sprays messy
Possible cause: Brass spray pipe, riser pipe or ventilation hole dirty.
Solution: Clean parts.
•
Gun does not spray any material
Possible cause: Riser pipe/brass spray pipe clogged.
Solution: Clean clogged parts.
•
Air escapes from the spray nozzle even though the trigger is in its initial
position
.
Possible cause: Valve bolt is jammed.
Solution: Pour oil onto the valve bolt and/or into the compressed air intake.
Operate the trigger several times.
10.
Warranty terms
The basis for all warranty claims is the complete spray gun and the proof of
purchase. Damage caused by improper handling of the spray gun is not covered
by the warranty.
If you have any questions, please indicate the type description or the article
number of the spray gun.
•
In conformity with legal regulations, you receive a 24-month warranty on
all products against material and manufacturing defects.
Excluded from the warranty:
•
Wear parts.
•
Damage caused by improper use.
•
Damage caused by lack of maintenance.
•
Damage caused by dirt.
