User Manual Frequency Inverter Vector Basic
MSF – Vathauer Antriebstechnik GmbH & Co KG
Tel: +49 (0) 5231 – 63030
Am Hessentuch 6-8
Fax: +49 (0) 5231-66856
32758 Detmold
Email:
Web: www.msf-technik.de
18 / 25
6.17. Menu point 17 – ON7Off – activate/deactivate
For operating the inverter, the final stage of the inverter must be released.
This is done by pressing the ON/OFF – button.
In the absence of the mains voltage an uncontrolled running of the inverter is thereby avoided.
If this feature is not desired, the buttons can be deactivated under this menu point.
Selection 00 = ON/OFF – button is deactivated
Selection 01 = ON/OFF – button is activated (factory default)
6.18 Menu point 18 – Minimum frequency for analog set point
(From 0 to Fmax in Hz)
Under the menu point 06 the set point can be adjusted. If an analog set point input is desired, then the
set factory minimum output frequency (5Hz) can be changed here.
6.19 Menu point 19 – Turning the periphery
The rotation of the periphery results in a 180° rot ation of the 7-segment-display and also the two Up
and Down-pushbuttons are reversed. This makes it possible to intuitively operate the peripherals on its
head.
Selection 00 = Screen display normal
Selection 01 = Display rotated by 180° and reverse buttons
6.20 Menu point 20 – Password lock
When selecting the menu item 20, the menu will be exit with a password lock. Due to this barrier, the
Up and Down buttons are deactivated and can only be unlocked by entering the password (number
43). Both pushbuttons have to be pressed (like for the menu entry) to enable entering a password.
6.21. Menu point 21 – Exit the menu
This selection will exit the menu
