Important
*** REMOVE THE CLEAR HEATER / SENSOR PROTECTOR SHEET BEFORE OPERATING THE DRYER ***
(protector sheet is located between the heater face and the sensor bracket)
At the end of all shifts and / or production runs, follow the Dryer Shutdown Procedure posted on the front of the dryer.
Any restriction in the dryer exhaust may result in excessive heat buildup within the chamber. Follow the Dryer & Exhaust
Hood Ducting directions in the manual.
Safety, continued
•
Stability during use, transportation, assembly, dismantling when out of service, testing, and foresee-
able breakdowns:
This equipment is designed and expected to be stable during all foreseeable conditions,
so long as the procedures and instructions given in this manual are followed.
•
Safe handling, transport, and storage:
Before storing the unit, follow the shutdown procedure on Pg.11
(or on the front of your machine) to allow the heater assembly to cool properly. No special handling con-
siderations are necessary, except to be aware of the weight of the equipment and take standard precautions
for moving such weights:
EC
-
II
-
30:
350 lbs (158.8 kg),
87”
x
49”
x
53” (221
cm x 124 cm x 135 cm).
EC
-
II
-
54
: 650 lbs (294.8 kg),
87”
x
73.5”
x
53” ( 221
cm x 187 cm x 135 cm).
Placing your equipment into service and using your machine:
To place your machine into service, follow steps
1
—
13
on pages 4 through 6.
To use your machine, follow the instructions on pages 11 and 12, after familiarizing yourself with the controls of your ma-
chine (see pages 8 through 10).
Pg. 3
