Assembly
1)
Unpack your drying cabinet and remove the (4) lag screws (with a 7/16 socket) holding it down to
the skid. Open the doors and remove the Shelves, the Center Tree (Wide Dri-Vault only), and any oth-
er items inside.
3)
Clean the inside thoroughly, first vacuuming then wiping down with a damp lint free cloth. This
should be repeated several times after turning on the unit to allow any trapped dust to be removed.
NOTE: Debris left in the chamber will contaminate screens and cause the image area to
develop pinholes.
2)
Slide the drying cabinet to the edge of the skid and install the (4) casters or levelers at each corner
of the machine. Tighten the nut with a 3/4” wrench or a 3/4” socket.
4)
Unwrap the shelves and wipe clean with a damp lint free rag. Install the shelves onto the Center
Tree (Wide Dri-Vault only), and inside walls of the drying cabinet. Install the shelves as shown.
5)
It is recommended that the exhaust be ducted outside to remove fumes and moisture from the
work environment. Do not exceed (1) elbow (90 deg.), and/or 8 feet of straight duct. In the event this
must be exceeded, a duct fan (booster) must be added to ensure proper airflow. If it is not exhausted
to the outside, make sure the elbow provided is used and pointed to the ground to restrict light from
entering the cabinet.
Shown with
door rem
oved
& 20x24 s
creens ins
talled
Center Tree
Controls
Intake
air
filter
Casters
NOTE: Be sure all 3 tabs of each shelf are properly seated!
— Power users:
For shops that want to have the fastest dry times with a full cabinet, it is highly rec-
ommended that you add a booster fan to the exhaust. This will draw the most amount of air through
the cabinet and will decrease dry times. The booster should be sized to match or slightly exceed the
machine’s rated CFM(CMM).
— Humidity is a big factor in dry times:
If your region is very humid, you should consider using
your Dri-Vault in an air conditioned room. If that is not an option, adding a dehumidifier next to the in-
take of the Dri-Vault would decrease dry times and increase efficiency.
VDC-513610
(Wide Dri-Vault)
shown below
3
