Safety Instructions
The Instruction Manual and Safety Instructions must be read and understood by
anyone operating the Vastex Screen Drying Cabinet.
The operator should read and understand the instruction manual before operating this equipment. Store
instruction manual and safety instructions near equipment for easy access to operators.
VASTEX Screen Drying Cabinet is intended for the drying of emulsion on screen printing screens. Do
not use for any other purpose unless authorized by Vastex International, Inc. Use of this equipment for
any other purpose can be dangerous and may cause damage to this equipment voiding the warranty.
It is recommended that the area around this equipment be designated as a work area and only author-
ized employees are allowed in this area.
Children and pets must be kept clear from the work area.
Never leave equipment unattended.
DO NOT operate dry cabinet with any cover or guard removed.
Operator must be familiar with controls of the dryer.
Before starting production, the operator must check that all covers and guards are in place, no material
has been left in the cabinet, and the exhaust duct is clear of any obstructions.
Always turn off power at the main disconnect at the end of production.
Do Not remove any cover or guard until power at the main disconnect is switched off and locked out. No
unauthorized persons are to be allowed inside the control boxes.
Turn off and lock out power at the main disconnect before cleaning and maintenance.
Only qualified technicians should be allowed to make repairs on the VASTEX Screen Drying Cabinet.
Noise and Vibration: This noise level produced by this equipment does not exceed 70 dB(A).
VDC-253610
Defect Warranty
3 Year
Maximum # of Screens
10 @ maximum size
Maximum Screen Size
25" x 36" x 1.625" (63.5 x 91.4 x 4.12 cm)
Smallest Screen Width
18" (46 cm)
Blower (Free Air)
200 CFM (5.7 cmm)120v or
290 CFM (8.5cmm) 240volt
Overall Depth x Width x
Height
39.5” x 34.75” x 29”
(100 x 88 x 74cm)
Heater Wattage
1,250 Watts 120 Volts or
1,550 Watts 240 Volts
Electrical Power
120V / 10A / 1 Ph. / 60 HZ / NEMA 5-15P plug
or 240V / 6A / 1 Ph. / 50/60 HZ / NEMA 6-15P
Shipping Weight*
367 lbs (166.5 kg)
Shipping Dimensions*
43" x 43" x 48" [109 x 109 x 122 cm]
VDC-513610
3Year
(10) @ 51” x 36” / (20) @ 25” x 36”
(10 screens) @ 51” x 36”
No minimum size
290 CFM (8.2 CMM)
37.9” x 62.5”x 32.3”
(96.3 x 159.1 x 81.9cm)
1,550 Watts @ 240 Volts
240V / 6A / 1 Ph. / NEMA 6-15P plug
573 lbs (277 kg)
69” x 43” x 35” (175 x 109 x 89 cm)
VDC-253624
3 Year
24 @ maximum size
25" x 36" x 1.625" (63.5 x 91.4 x 4.12 cm)
18" (46 cm)
350 CFM (9.9 CMM)
39.5” x 34.75” x 81”
(100 x 88 x 206cm)
2 x 1,550 = 3,100 Watts 240 Volts
240V / 16A / 1 Ph. / 50/60 HZ /NEMA 6-20P plug
670 lbs (303 kg)
43" x 43" x 84" [109 x 109 x 213 cm]
Machine Specifications
Drying times will vary
. Humidity, thickness and type of emulsion used, and
the size of screens are factors in Dri-Vault curing time.
Putting this Equipment into Service —
Using this Equipment —
To put your drying cabinet into use:
1.) Follow the assembly instructions on page 4 of this manual.
2.) Familiarize yourself with the controls and features of your unit (see page 5 and 6).
To use your drying cabinet, follow the operating and maintenance instructions on page 7.
2
