VASTEX C-1000, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 4 / 8

1) Install Upper Screen holder at desired position as shown below. The
Spine is marked to indicate which notch is used for each size screen.
Spine
Upper Screen Holder
1a 1b 1c
1d
36” Tall Screen
31” Tall Screen
28” Tall Screen
23”/24” Tall Screen
3) To install a screen onto the C-1000, install the Upper
Screen Holder at the appropriate position (See Step 1).
Then push down on the Lower Screen holder with the
bottom of the screen, pivot the screen in, and guide it
into the Upper Screen Holder.
3a 3b
2) Install Scoop Coater Holder in
the notch above the screen
size you are using. The Scoop
Coater Holder is installed the
same as the Upper Screen
Holder.
Optionally , use (2) 10-32 x
1/2” Bolts and (2) 10-32 Serrat-
ed nuts to install at the top of
the Spine.
Scoop Coater
Holder
(Above) Scoop Coater Holder installed.
Assembly/Operation
Pg. 4