3
with a little force, the steam will be sprayed from the soleplate continuously. When loosen the steam release button, the
appliance can only be used for dry ironing without steam.
Lack of water indicator
If less water in the tank, the indicator will be illuminated, following with two “D” sounds of buzzer, the steam generator
stops working. It prompts you need to add water into the tank.
Descaling indicator
If the descaling indicator illuminating, it indicates the steam generator shall be cleaned by virtue of the mineral deposits
collecting to a degree. When the system ensures the mineral deposits have been removed, the indicator will be
extinguished.
Drain water cap
Open the cap for cleaning the steam generator (see Fig. 1).
Cord clamp
When not in use, the steam supply hose and power cord shall be stored. Pull out the cord clamp first, after winding the
cord around the cord winding groove, push the cord clamp back.
Automatic power off
The appliance will be automatically turned off if no steam sprayed out from the soleplate within 10 minutes both for
safety and to save energy.
BEFORE FIRST USE
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes for the purpose of
removing any residue on the soleplate according to the section of
“Steam ironing”
.
NOTES:
-It is normal that strange odor comes out from the unit for the first use. This will cease after a short
while.
-Some particles may come out of the soleplate when you use the iron for the first time. This is normal;
the particles are harmless and stop coming out of the iron after a short while.
-When you switch on the appliance, the steam generator may produce a pumping sound. This is
normal; the sound tells you that water is pumped into the steam generator.
-During the heating process of the soleplate, there will be little steam coming out from the soleplate
automatically and this phenomenon will continue for about 3 seconds, This is normal.
USING YOUR STEAM STATION
The appliance has two iron portions. You can use dry ironing or steam ironing, the details refer to the following:
Dry ironing
1. Put the iron on the steam generator’s thermal insulating cushion.
2. Connect the plug to wall outlet; together with one beep can be heard. Press down the Power switch, the power
indicator starts to illuminate.
3. Turn temperature dial to your desired setting, which is depended on the fabric of garment, and the temperature
indicator will illuminate. Refer to IRONING TIPS latter. The iron starts heating.
4. When the temperature indicator turns off, the selected temperature is reached. You now can start ironing.
WARNING: Never touch hot soleplate at any time before cooling down!
Steam ironing
The machine works with normal tap water. In case of very hard water (hardness above 27
º
F) we suggest
using 50% distilled water diluted with tap water. Alternatively, we suggest using normal bottled
drinking water. The use of de-ionized water is not recommended.
1. Grasp and press the water tank’s handle to take out of the water tank, then open the filling aperture cap and fill water
into the water tank. After it, close the filling aperture cap. The max capacity of water tank is 1.7L, the water level shall
not be exceeded the MAX mark.
2. Replace the detachable water tank properly.
3. Put the iron on the steam generator’s thermal insulating cushion.
4. Connect plug to the wall outlet together with one beep can be heard.
Press down the Power switch, the power
Содержание Stiroplus SP 1079
