background image

WARRANTY CONDITIONS / MANUFACTURER’S DECLARATION    17

  4  WARRANTY CONDITIONS

Vasco hereby declares to guarantee the Vasco Niva FC for two years from the date
of purchase. The invoice date of the installation company is proof of the purchase
date. If there is no invoice available, the production date will be the purchase date.
The warranty consists only of replacing spare parts, the fan and electronic printed
board. There is no additional warranty period for spare parts. 
The warranty does not entail:
• 

Assembly and disassembly costs

• 

Defects, which, in our opinion, are the result of improper handling, negligence  

 

or accidents

• 

Defects that are the result of handling or repairs by third parties without our  

 permission
• 

Defects that are the result of irregular and/or unprofessional maintenance

• 

Defects that are the result of using the unit in a non-suitable environment

The warranty is void if the FCU is used under the aforementioned conditions. The
installer should contact Vasco for return shipment of defective components. The
installer will receive a warranty return number. The defective components must be
dispatched to Vasco stating this return number.

Kruishoefstraat 50, B-3650 Dilsen

T. +32 (0)89 79 04 11

F. +32 (0)89 79 05 00

[email protected]

www.vasco.eu

MANUFACTURER’S DECLARATION

Vasco declares that the FCU carries the CE label and is designed, manufactu-
red and commercialized in compliance with the following EEC Standards:
LV Directive 2014/35/EU with following technical standards:
 

EN 60335-2-40:2003 + A11:2004 + A12:2005 + A1:2006 + EC:2006

 

+ A2:2009 + A13:2012 + A13/EC:2013, EN 60335-1:2002 + A11:2004

 

+ A1:2004 + A12:2006 + A2:2006+ A1/EC:2007 + A13:2008 + EC:2009

 

+ EC:2010 + A14:2010 + A15:2011

EMC Directive 2014/30/EU with following technical standards:
 

EN 60335-1:2012, EN 55014-1:2006 + A1:2009 + A2:2011,

 

EN 61000-3-2:2006 + A1:2009 + A2:2009, EN 61000- 3-3:2013,

 

EN 55014-2:1997 + A1:2001 + A2:2008

RoHS Directive 2011/65/EU

Vasco Group nv, Dilsen, België, august 2017
P. Nijs, CEO

NL

FR

DE

EN

IT

PL

Содержание NIVA FC75




















Отзывы: