
aXsGUARD Gatekeeper Authentication Quick Install Guide v1.6
Connecting the aXsGUARD Gatekeeper to a Network
4
Connecting the aXsGUARD Gatekeeper to a Network
4.1
Overview
In this section we provide step by step instructions to connect the aXsGUARD Gatekeeper to your network.
Important:
Please first read the safety information in section
2
, check that all the package contents you
need (listed on a separate sheet supplied with the aXsGUARD Gatekeeper) have been
supplied, and that you have all the information you need for installation (listed in section
3
).
4.2
Powering on the aXsGUARD Gatekeeper
Powering the aXsGUARD Gatekeeper on requires the following four steps:
1.
Connect the
eth0
interface to the network's hub or switch with an appropriate network cable. The
aXsGUARD Gatekeeper has two or more LAN Ethernet interface(s), depending on the chosen configuration
and type (AG-3 and AG-5 series). For the AG-3XXX and AG-5XXX models,
the default LAN interface is
labeled as
eth0
(example stickers are shown in the images below: please check the sticker labeling the
interfaces on your aXsGUARD Gatekeeper to identify the correct socket).
© 2009 - VASCO Data Security
13
Image 3: Back of a Typical aXsGUARD Gatekeeper