Vascat MAC R Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 46 / 60

INSTRUCTIONS AND MAINTENANCE MANUAL
MAC R MOTORS
PAGE: 46
CODE: CTT12 EDITION: 01 DATE: MAY 2013
Subject to technical changes without prior notice
5.3.2 Start-up
WARNING
Qualified personnel
All the preliminary work must be carried out by qualified personnel and when the motors are completely stopped
and isolated from the mains. Always check that there is no voltage!
If the mains power cables are connected, make sure there is no voltage and that no power voltage can be
applied in any way.
PRECAUTION
Damage to the motor
Before starting up the motor, check that there are no elements blocking the rotation of the motor.
MOVING ROTATING PARTS
During start-up and while the motor is in operation, the customer is responsible for taking precaution to avoid
accidental contact with the rotating parts.
Proceed as follows to start up the drive:
1- Start-up the drive auto-tuning procedure so that it can recognise the motor (see drive documentation for
more details).
2- If the auto-tuning procedure is completed successfully, start the motor rotating at low speed. Check that
the motor behaves satisfactorily and that there are no strange noises or vibrations.
3- Gradually increase speed to rated values.
4- After several hours in operation, check that the thermal behaviour of the motor corresponds to the motor
service type. If in doubt, please contact VASCAT.