Model # XLO2254CR-NV
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Page 2
Factory No. 33-10944
MANUFACTURER: VAS Furniture
CATALOG:
54” 3-in-1 Console (XLO2254CR-NV)
DATE OF MANUFACTURE: November, 2010
MADE IN CHINA
FITS UP TO MOST 60
” FLAT PANEL TVs
MAXIMUM LOAD 165 LB (74.8 kg)
FITS UP TO MOST 60
” FLAT PANEL TV’S WITHOUT
SWIVELING BRACKET
MAXIMUM LOAD 165 LB (74.8 kg)
MAXIMUM LOAD 50 LB (22.7 kg)
1. Please read the Assembly Instructions prior to assembling this product.
2. Remove all hardware from box and sort by size.
3. Check to see that all hardware and parts are present BEFORE assembling.
4. Ask a friend to assist you with the assembly of this furniture.
5. To avoid damage, assemble the product on a sturdy, level and protective surface.
6. Please wait until all steps are completed before tightening bolts.
7. Make sure all bolts are tightly fastened before the unit is used.
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S
G E N E R A L I N F O R M A T I O N , T I P S & T R I C K S
This product is sold with Tip Restraint Hardware kit. You must install the Tipping Restraint
Hardware between the wall and the TV stand to prevent any accidents or damages. When
properly installed, this restraint can provide protection against the unexpected tipping of the
unit due to small tremors, bumps or climbing. The restraint is only a deterrent and is not a
substitute for proper adult supervision. Use of tip-over restraints may only reduce, but not
eliminate, the risk of tip-over.
THIS UNIT IS INTENDED FOR USE ONLY WITH THE PRODUCTS
AND MAXIMUM WEIGHTS INDICATED. USE WITH OTHER PRODUCTS OR PRODUCTS
HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY
CAUSING POSSIBLE INJURY. THE BASE OF THE TELEVISION MUST BE PLACED
SQUARELY IN THE CENTER OF THE STAND WITH NO OVERHANGING ON EITHER SIDE.
