Model # XLO2254CR-NV
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Page 5
Factory No. 33-10944
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make it easier during assembly of unit.
1. Choose the option suits your needs. Locate Long Spine (D) or Short Spine (D1) and set
back face down on a scratch free surface as shown in detail #1.
2. Align
the “U” shape bracket holes of three Shelf Frames (A, B & C) with the threaded inserts
on the Spine (D or D1) respectively. Make sure the protruding portion will face floor after
assembly. Insert and screw 3/4
” Bolts (2) with Flat & Lock Washers (5 & 6) through the
bracket holes into the Spine. See detail #1.
DO NOT tighten the bolts.
3. Proceed to insert and screw 1 1/4
” Bolts (3) with Washers (5 & 6) through the pre-drilled
holes on rear rail of three shelf frames (A, B & C) into the Spine. See detail #1.
Required hardware in this step
Description:
(2)
– 3/4” Bolt
(3)
– 1 1/4” Bolt (5) - Lock Washer (6) - Flat Washer
Sketch
Qty.
(6 pcs)
(3 pcs) (9 pcs)
(9 pcs)
Tools required: Allen Wrench
