2
www.vanracking.com.au
VAN RACKING MOUNT FITMENT
NOTE: For installation of the ladder lock kit, before fi tting front end caps,
slide the 2 M8 hex bolts into the rail (found in ladder lock kit).
Step 1
Insert the rail end caps and fi x with 3x8 fi xing screws, item No.7. A small phillips head screw driver will be required.
1:
2:
M8 Flat Washer
M8 Nyloc Nut
Cable Clamp
Block
Braided
Cable
Optional: If you have purchased ladder locks, please proceed with fi tting at step 1, otherwise begin at step 2.
1 - Assemble the cable and cable clamp onto the installed hex bolts. 2 - Tighten the hardware in place with a 13mm socket wrench in the appropriate area.
M8 x 20mm Hex Bolt
