Model # RTG30T1
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 72-14494
Page 5
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Pick up one Wood Front Rail (O) and attach to the Top Shelf Frame (A) by using two 1 1/4
”
Bolts (3) with Lock Washers & Flat Washers (4 & 5) into the pre-drilled holes as shown in
detail #2. Make sure the top edges are flush with each other. Tighten the bolts with Allen
Wrench provided.
3. Repeat last step to attach the other Wood Front Rail (O) to Second Shelf Frame (B).
Required hardware in this step
Description:
(3)- 1 1/4” Bolt
(4)- Lock Washer
(5)- Flat Washer
Sketch
Qty.
(4 pcs)
(4 pcs)
(4 pcs)
Tools required: Allen wrench
