Model # XLGTD52-7K
VAS
®
Page 24
Factory # 33-10944
Assembly Instructions
35. The Sensor/Sound Shelf (N) provides two options: positioned above the TV or below the TV.
Depending on the option you prefer, slide the SSS Spine (M) onto the Mounting Frame (K)
properly. Adjust the height of SSS Spine so that it will be the correct distance above or
below your TV and attach it in place using the ½ inch Bolts (2) with Washers (7 and 8).
36. Attach the Monitor Brackets (L) to the back of the television following steps 20 & 21, or 22 &
23, depending on the type of TV that you own.
37. Once the Monitor Brackets are attached onto the back of television, ask for assistance to lift
the television up to attach the Monitor Brackets onto the Mounting Frame (K). Set the hooks
on the Monitor Brackets over the Mounting Frame and then lower them onto the bars of the
Mounting Frame.
38. Center the television and tighten both Lock bolts with a long Phillips screwdriver until they hit
underside of the Mounting Frame (K) to ensure your TV is safe and secure on the wall.
39. Repeat step 19 to install the Sensor/Sound Shelf (N) onto the SSS Spine (M).
40. Place assembled console under your TV. Finally, connect the A/V and power cables to your
TV. You are now ready to enjoy your wall-mounted Flat Panel TV.
