Model # XLGTD52-7K
VAS
®
Page 11
Factory # 33-10944
Assembly Instructions
10. Put the Suction Cups (1) firmly into the top holes of Top Shelf Frame (A) and attach the
Glass Clamps (9) to the threaded inserts on both Front Posts (C and D) and Wood Back
Supports (F). Make sure the set screw on the Glass Clamp is on the bottom.
TIP:
If a suction cup resists insertion, try pressing down on the middle of the cup with the
Allen Wrench while twisting it clockwise into the hole.
11. Properly install the Glass Top and Glass Shelf (G and H) with the black side of the glass
shelf down. Tighten the Set Screw located on the bottom side of the Glass Clamps by
turning the screw clockwise. This will help secure the Glass Shelf in place to prevent the
shelf from falling easily and getting damaged.
NOTE:
If a glass shelf is scratched, you can minimize the damage by using a BLACK
marker and filling in scratched area from underneath.
Glass Clamp w/Bolt
(4 used in this step)
⑨
Suction Cup
(8 used in this step)
①
