18 / 24
7. Connecting
7.1. XLR cable
The standard way of connecting the XLR is: one end connects to the male plug, and the other end
connects to the female. As below:
Pin 1 = ground
Pin 2 = negative signal
Pin 3 = positive signal
Noted
:
In order to avoid failures and interference signal transmission
,
we connect a resistance 120
Ω
(1/4W) at the end of the DMX connecting as below:
7.2. The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
Содержание LED Accu Penta
