6 / 9
<ENTER> button to select the menu function currently displayed, or to enable a menu option. To
return to the previous option or menu without changing the value, press the <MENU> button.
No alterative worth that return re-option or menu , press(MENU)button
4.2.
Menu Map
RPON
set up the dmx address A001 – A512
AU01
fast
speed
movement
AU02
slow
automatic
movement
SNOF
Sound to Light OFF
SNON
Sound to Light ON
RPOF
TILT and Pan are non inverted
RPON
invert
PAN
RTON
invert
Tilt
RTOF
invert
the
display
RDOF
non invert the display
DFON
default
settings
Note ! the factory settings are DMX address A001 and every function is non inverted.
4.3.
User configuration
Setup automatic moving mode(self-motion move)
.Press the MENU until it shows AU01
.Use the UP/DOWN buttons to set to AU01 or AU02 , Press ENTER to confirm.
Sound to light moving mode(sound control)
.Press the Mode button until it shows SNOF .
.Use the UP/DOWN buttons to set to SNON, press ENTER to confirm.
Master/slave mode(auto-running
、
sound control)
This mode will allow you to link up 32 units together without a controller.
Use standard DMX cables to daisy chain your fixtures together via the DMX
connector on the rear of the units. Proper performance it may be necessary to
use a terminator at the last fixture. Choose a unit to be the Master. Select NAFA/NASL OR NStS (see
below for readout)depending upon which master mode your require. The master
unit must be the first unit in line. Finally ,chain the units together using DMX cable.
To set the pan to inversion
Press the MENU until it shows RPOF.
Use the UP/DOWN buttons until it shows RPON, press ENTER to confirm.
