background image

WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive

persons should avoid looking at strobe lights.

WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules

that apply in your country. Always secure the device with a secondary

safety attachment, such as a safety cable or a safety chain.
The load capacity of trusses or other fixtures must be sufficient for the

intended number of devices. Not that the movement of the head places

additional loads on the load-bearing parts.

CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce

very bright light. This is also valid immediately after you turn on the

device, when the device operates in automatic mode or under remote

control and when you turn off a DMX controller that is connected to the

device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure

that nobody stays close to the device. If work has to be performed in the

area of movement or in the near vicinity of the device, it must remain

turned off.

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any

direct heat source. Keep the device away from naked flames.

Safety instructions

 

8

Hero Spot 230

moving head

Содержание 477539









































Отзывы: