VarTech Systems VT520, Руководство пользователя

Страница: 3 / 24

2
ϡ ϡ ϡ ϡ!!!!
Please read this user’s manual cautiously and completely before operating this
monitor.
Important Safety Instructions
Before using the monitor, please read this user’s manual thoroughly to help protect against damage your
own and other people’s property from potential damage and ensure your own and other people personal
safety.
‹
Be sure to observe the following instructions with understanding meaning below.
‹
For your safety, be sure to observe the warning in this manual.
‹
The installation or adjustment, please follow this manual instructions or refer all servicing to qualified
service personnel.
Safety Precautions
If smoke or peculiar smell comes from the monitor, remove the power plug from the
outlet immediately .
If the monitor is still used in this condition, it may cause a fire or an electrical shock.
Make sure that the smoke or smell stopped, after that contact your dealer for inspection.
If there isn’t picture, remove the power plug from the outlet immediately .
If the monitor is still used in this condition, it may cause a fire or an electrical shock.
Contact your dealer for inspection.
If water is spilled or objects are dropped inside the monitor, remove the power plug
from the outlet immediately.
If the monitor is still used in this condition, it may cause a fire or an electrical shock.
Contact your dealer for inspection.
If the monitor is dropped or the cabinet is damaged, remove the power plug from the
outlet immediately .
If the monitor is still used in this condition, if may cause a fire or an electrical shock.
Contact your dealer for inspection.
To turn off the power of the monitor, press ”O” on the main power switch at back cover.
The power standby/on indicator goes off and the set cannot to be turned on/ off by using the POWER
button on the remote control. (To turn on/off the monitor by the remote control, press the main power
switch again and light the power standby/on indicator.)
‹
When turning off the monitor by pressing the POWER button on the remote control, the main power of
the monitor is not turned off completely.
‹
To disconnect the monitor completely from power supply, remove the power plug from the outlet.
Press ”O” to turn off monitor completely