Varta element Series, Дополнительные инструкции

Страница: 126 / 132

126
Subject to modification! Updated 06/2017
Adding the battery charger at the right

Remove the cover from the compartment to the right.

Slacken the battery charger at the left and pull it forward a
few cm. Do not detach the existing cabling on the front.
Make sure that the cables are not strained

Remove the cable from the back of the battery charger at
the left.
Guide this cable behind the partition wall in the
compartment to the right.

Plug in the connection (jumper) on the back of the battery
charger at the left (into the upper socket).
Figure 6: Module compartment for expansion to element 6/9/12
1 Jumper to battery charger at the left
2 Connection to inverter

Place the additional battery charger into the compartment
at the right.
Do not push in all the way initially.