VARTA Storage GmbH VARTA pulse 3, Инструкция по эксплуатации, Страница: 86 / 146

86
Subject to modification! Updated 12/2017
If everything is all right, then:

place the hood over the mounting plate at an angle of 45°,

lower the hood carefully until it rests against the back of
the mounting plate,

connect the earth cable between the hood and battery
inverter,

check the electrical connection between the hood and
central earthing point by means of a continuity test,

swivel the hood towards the unit while paying attention to
the position of the On/Off switch
o
Make sure that no cables are pinched!
o
The spring must engage audibly!

secure the energy storage system with the three supplied
screws on the bottom.
Figure 20: Hood fastening screws