Problem settlement
In case of a problem on the system, solve the problem ASAP referring to the table below. Please follow the guide below.
Power supply of appbot LINK is not
turned on.
When booting initially, APPBOT-XXXXXX
network is not searched.
When connecting to a network, appbot
LINK is not connected to the internet.
It is not connected after moving to an
installation place.
No sound even if turning on the both
directions audio function.
Camera’s image disappears momentarily.
cannot to smartphone connect while in
use after the network registration.
1
2
3
4
5
6
7
- Sufficient charging is necessary before turning on the power supply.
- Charge over 30 minutes then turn on the power supply again.
- Re-boot the product and press Reset then try again.
- Confirm whether the wireless router to connect appbot LINK works
with the internet.
- Tray again after confirming the password of the wireless router.
- It is not connected if the connected wireless router is not around there.
- It should be installed again in the same way of the initial product
installation.
- Modulate the volume of in smart device.
- Camera image transmission can be delayed on account of a network
delay.
- Confirm whether the product was installed to a place where wireless
internet communication works properly.
- Confirm whether the power supply of the connected wireless router
has been turned on.
- If the power supply is on, confirm whether it is connected to the
internet.
Problem
NO.
Measures
Wi-Fi CONTROLLED ROBOT THROUGHT INTERNET
LINK
AppBot
29
