Varjo XR-4, Руководство пользователя

Страница: 16 / 45

14
EN
Operating and storage environment
Placement
Use the headset only in adequately ventilated areas.
• Do not cover the headset or the controllers.
• Do not cover the air vents on top of the headset.
• Do not place the headset near objects that could scratch the
lenses.
• Do not expose the headset or the accessories to open flames
or lit smoking products.
• Do not place the headset or the accessories near heat
sources, hot areas, or extreme temperatures.
• Do not use the headset or the accessories near water or other
liquids.
• Do not use the headset or the accessories after a dramatic
change in temperature. When you move the headset or the
accessories between environments with very different tem-
peratures and/or humidity ranges, condensation may form on
or inside the headset or any of the accessories. Allow enough
time for the moisture to evaporate before using the headset
or the accessories.
NOTE:
When you move the headset and the accessories from
low-temperature conditions into a warmer environment or vice
versa, allow the headset and the accessories to acclimate to
room temperature before you power them on. Use the headset
and the accessories at temperatures between 10°C to 27°C
(50° to 80°F). It is safe to use the headset and the accessories
at a maximum temperature of 35°C (95°F). Store the headset
and the accessories in their sales box at temperatures between
0°C to 40°C (32°F to 104°F) to minimize unintentional damage.
Radio frequencies
Component Rating Frequency Peak output power
Headset 15 V, 3 A 2.402–2.48 GHz 4 mW
European RF Exposure Information
Your device is a radio transmitter and receiver. It is designed not
to exceed the limits for exposure to radio waves recommended
by international guidelines. These guidelines were developed
by the independent scientific organization ICNIRP and include
safety margins designed to assure the protection of all persons,
regardless of age and health. The guidelines use a unit of
measurement known as the Specific Absorption Rate, or SAR.
The transmitter output value is less than the low power exclu-
sion level specified in EN 62479:2010.
Recycling
The Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), which entered into force on 13th February
2003, resulted in a major change in the treatment of electrical
equipment at end-of-life. Check the local regulations for proper
disposal of electronic products.
The crossed-out wheelie bin symbol on your headset,
accessories, battery, reading materials, or packaging
reminds you to take all electrical and electronic
products, batteries, and used packaging materials
to separate collection at the end of their working
life. Do not dispose of these products as unsorted
municipal waste; take them for recycling. For info on
your nearest recycling point, check with your local
waste authority.
European Union notice
Hereby, Varjo declares that the HS-10 and HS-10A headsets are
in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet
address:
varjo.com/compliance .
FCC and ISED Information to the user
NOTE:
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the
user will be required to correct the interference at their own
expense.
This Class A digital apparatus complies with the Canadian
standard ICES-003.
California Proposition 65
WARNING:
Cancer - www.P65Warnings.ca.gov.
FCC and ISED Compliance statement
This device complies with part 15 of the FCC Rules and to
RSS-247 of Innovation, Science and Economic Development
Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the
equipment.
FCC and ISED Radiation Exposure statement
This equipment complies with FCC and Canadian radiation ex-
posure limits set forth for an uncontrolled environment. These
transmitters must not be co-located or operating in conjunction
with any other antenna or transmitter.
RoHS compliance
This equipment is in compliance with Directive 2011/65/EU of
the European Parliament and of the Council of 8 June 2011,
on the restriction of the use of certain hazardous substances
in electrical and electronic equipment (RoHS) and its amend-
ments.
Japanese Radio Law Compliance
This device is granted pursuant to the Japanese Radio Law
(
電波法 ).
This device should not be modified (otherwise the granted
designation number will become invalid).
User guide updates
Varjo reserves the right to update the information con-
tained in this user guide. You can find the latest version at
varjo.com/downloads .