30. Close the printhead door.
31. Install the multi-sheet tray, that was previously unpacked,
onto the back of the printer..
32. Open the front window.
33. Rotate a 1/2 turn and remove the pin(s)
from inside the printer.
26. Remove the desicant bag.
27. Open the roll cover and remove the protective film.
28. Remove the 2 spindle retainers and tape.
29. Open the printhead cover and remove the
protective foam.
Important
Do not touch the printhead or blue latch, no printhead
installation is required at the moment.
Perfecta
®
STP Series
Assembly Instructions
Page
6
